BULK STORAGE – FRIDGE ONLY – THREE DRAWER – REAR ENGINE – HCR3 SERIES
Product code: HCR3/CT
Provides back-up storage, close to the point of use, for maximum efficiency during busy service periods. With our low velocity cooling system, food can be packed into the…
0°C to +15°C
878 x 885 mm
A+
Configure this unit
That combination is not available — try another option.
Engineered to run for less
Adande's drawer technology holds temperature with far less energy than a conventional unit.
Estimated at £0.28/kWh. Actual cost depends on your tariff and usage.
What makes Adande different?
Adande’s patented Hold the Cold® technology — the first significant innovation in commercial refrigeration for over 70 years.
Insulated cold container
Only the rigid insulated container is cooled — the drawer seals the cold air inside rather than chilling a whole cabinet, so far less energy is used.
Robust drawer runners
Mounted outside the cold container to avoid food contact and ice build-up, and tested to 200,000 openings.
Heated magnetic seal
A hidden, heated magnetic seal resists wear and damage — and is guaranteed for two years.
Internal condensers
Housed internally and protected from fats and oils — no filter to change and less maintenance.
Runs on remarkably little
Uses far less energy than a conventional unit — up to three drawers can run from a single 3-pin plug.
More capacity, smaller footprint
Up to 86 litres of usable storage per standard drawer — among the most in its class.
Temperature you can trust
Precise, stable control in 0.1°C increments keeps food fresher for longer — fish held at exactly +1°C stays fresher, and any drawer can move between fridge and freezer to suit the service.
Applications
Specifications
- Temperature
- 0°C to +15°C
- Energy class
- A+
- Annual energy use
- 239 kWh/yr
- Dimensions
- 878 x 885 mm
- Finished height
- 1288 mm
- Electrical
- 230V 50 Hz, UK three-pin plug and 2 m coiled cable
- Refrigerant
- R600a
- Product code
- HCR3/CT
