Locking rollers
Locking rollers For under-counter two-drawer units fitted with back rollers and front feet (Code: R) or small rollers and feet (Code: SR), locking rollers make those units easier…
What makes Adande different?
Adande’s patented Hold the Cold® technology — the first significant innovation in commercial refrigeration for over 70 years.
Insulated cold container
Only the rigid insulated container is cooled — the drawer seals the cold air inside rather than chilling a whole cabinet, so far less energy is used.
Robust drawer runners
Mounted outside the cold container to avoid food contact and ice build-up, and tested to 200,000 openings.
Heated magnetic seal
A hidden, heated magnetic seal resists wear and damage — and is guaranteed for two years.
Internal condensers
Housed internally and protected from fats and oils — no filter to change and less maintenance.
Runs on remarkably little
Uses far less energy than a conventional unit — up to three drawers can run from a single 3-pin plug.
More capacity, smaller footprint
Up to 86 litres of usable storage per standard drawer — among the most in its class.
Overview
Locking rollers
For under-counter two-drawer units fitted with back rollers and front feet (Code: R) or small rollers and feet (Code: SR), locking rollers make those units easier to move, when access is required for maintenance or hygiene purposes.
Pulling out the bar of both Locking Rollers raises the unit off the floor and, with the weight on all four rollers (the two back rollers are always on the floor), moving the unit forward and back is much easier.
| Unit Code | Side Engine | Rear Engine | |||||
| VCS | VCS | VCM | HCS | VCC | VCR | HCR | |
| L | yes | yes | yes | yes | – | yes | yes |
| SL | yes | yes | yes | yes | – | yes | yes |
Specifications
- Electrical
- 230V 50 Hz, UK three-pin plug and 2 m coiled cable
- Refrigerant
- R600a
